Jumpers And Connectors - Supermicro C7H270-CG-ML Quick Reference Manual

P c
ackage ontents
• One (1) Supermicro Motherboard
• Two (2) SATA Cables, One (1) I/O Shield
• One (1) Quick Reference, One (1) Driver CD

Jumpers and Connectors

Jumper
CLEAR CMOS Clear CMOS Button
JBR1 BIOS Recovery
JBT1 Clear CMOS (on board)
JI2C1/JI2C2 SMB to PCI-E Slots
JPME2 Intel® Manufacturing Mode
JPUSB1 USB Wake Up Enable (Back Panel USB 0/1)
JWD1 Watch Dog Function Enable
POWER BUTTON Internal Power Button
RESET BUTTON Onboard System Reset Button
Connector
AUDIO FP
BT1
COM1
CPU_FAN1
I-SATA0~5
JD1
JF1
JL1
JPW1
JPW2
JSD1
JSPDIF_OUT
JSTBY1
JTPM1
PCI-E M.2 CONNECTOR 1
SYS_FAN1/FAN2
USB 2/3
USB 8/9 (3.0)
All manuals and user guides at all-guides.com
Jumpers
Description
Connectors
Front Panel Audio Header
Onboard Battery
COM1 Port Header
CPU Fan Headers
(Intel® PCH) Serial ATA (SATA) 3.0 Ports 0~5 (6Gb/sec)
Pin 1~4: External Speaker
Front Panel Control Header
Chassis Intrusion Header
24-pin ATX Power Connector (Required)
8-pin CPU Power Connector (Required)
SATA DOM (Disk On Module) Power Connector
Sony/Philips Digital Interface (S/PDIF) Out Header
Standby Power Header
Trusted Platform Module (TPM) Header
PCI-E M.2 Connector 1, small form factor devices and other portable devices for
High speed NVMe SSDs
System Fan Headers
Front Panel Accessible USB 2.0 Headers
Front Panel Accessible USB 3.0 Header
Default
Push Button Switch
1-2: Normal
Short pads to clear CMOS
On: Enable
1-2: Normal
1-2: Enable
1-2: RST
Push Button Switch
Push Button Switch
Description