Related Manuals for Ayra IntenZ CB700
Summary of Contents for Ayra IntenZ CB700
- Page 1 IntenZ CB700 7x40W RGBW LED Blinder User Manual The information in this user manual is subject to change at any time without notice. Version: 1.0 Date of creation and author's initials: 07-10-2019 RV Revision date and author's initials: -...
- Page 2 'Box contents' are included in the package. In the event that the Ayra IntenZ CB700 does not function properly, or if you have any issues while operating it, please remove the plug from the power socket and contact your retailer for assistance.
-
Page 3: Safety Instructions
Safety Instructions WARNING! Keep this device away from moisture, water and rain to avoid the chance of electric shocks. WARNING! Only connect this device to a suitable power socket. This device functions on a specific power voltage. If it is plugged into a power socket with a different voltage, it could result in permanent damage and even dangerous situations such as fire or electric shocks. - Page 4 - Should the device not be used in the manner described in this user manual, damages or even injuries could occur. Ayra cannot be held responsible for any injuries or damages that occur as a result of improper use of this product.
- Page 5 Only suitable for indoor use: this product was only designed for indoor use. The maximum environmental temperature must not exceed 40 degrees Celsius (104 degrees Fahrenheit). Contact: Ayra professional lighting products Verrijn Stuartweg 18 4462 GE Goes The Netherlands Please do not send any products to this correspondence address.
- Page 6 Overview and Operation Guidelines for this Device Light output Fan airflow cut-out Quick-coupler mounting point Suspension bracket attachment point Fuse Power input (lockable blue power connector) Power output (lockable grey power connector) Display (not visible in the picture) Microphone DMX input and output (3-pins XLR) The information in this user manual is subject to change at any time without notice.
- Page 7 Operation and Mounting To activate the device, plug it into a mains socket. Once it's connected to an active power source, it will turn on automatically. During start up, ‘WELCOME’ will be shown on the display, which means the device is not yet ready to be operated.
-
Page 8: Operating Modes
desired, operate in sound-controlled mode. There are 13 built-in shows (00-12) and show ‘00’ will activate a randomised pallet of shows. The speed values can be adjusted from 01-99 and are to be set if you’re not using the internal microphone. If you do want to make use of the internal microphone, enable Sound Mode so the microphone can detect the beat of the music and adjust its program to the beat. - Page 9 In Slave mode, you can daisy-chain multiple devices of the same type so they all function a specific way. This way you can coordinate your light show by having multiple separate devices moving the same way instead of all different directions, which can be chaotic. Basically, you can connect an unlimited number of slave devices to a master device, but a DMX booster is required in between.
- Page 10 Dimmer Red 000-255 (0-100%) Dimmer Green 000-255 (0-100%) Dimmer Blue 000-255 (0-100%) Dimmer White 000-255 (0-100%) Colour MacroPpreset 000-005 No function 006-125 Fixed colour selection 126-189 Colour jump, slow-fast 190-255 Colour fade, slow-fast Effect Mode 000-009 No function 010-029 Effect 1 030-049 Effect 2 050-069 Effect 3 070-089 Effect 4...
- Page 11 Master Dimmer Pixel 3 000-255 (0-100%) Shutter / Strobe Pixel 3 See Pixel 1 Colour Macro Preset Pixel 3 000-005 No function 006-125 Fixed colour selection 126-189 Colour jump, slow-fast 190-255 Colour fade, slow-fast Master Dimmer Pixel 4 000-255 (0-100%) Shutter / Strobe Pixel 4 See Pixel 1 Colour Macro Preset Pixel 4...
- Page 12 Dimmer Blue Pixel 1 000-255 (0-100%) Dimmer White Pixel 1 000-255 (0-100%) Dimmer Red Pixel 2 000-255 (0-100%) Dimmer Green Pixel 2 000-255 (0-100%) Dimmer Blue Pixel 2 000-255 (0-100%) Dimmer White Pixel 2 000-255 (0-100%) Dimmer Red Pixel 3 000-255 (0-100%) Dimmer Green Pixel 3 000-255 (0-100%)
- Page 13 Upright use The IntenZ CB700 is not suited for upright use on bars, tables or any other flat surface. Upright use is only possible when the U-shaped suspension bracket is mounted to a sufficiently strong surface. It should be possible to mount the CB700 to a DJ table or a truss pole.
- Page 14 The IntenZ CB700’s fuse only protects the device itself. The power supply input and output are linked together. Because of 230V group can handle a maximum of 10A and the IntenZ CB700 consumes power itself, the output can take a maximum load of 10A from linked devices. This also includes a calculated safety margin.
- Page 15 DMX Lighting Troubleshooting If you have a problem with your DMX light effect, please consult the troubleshooting section for possible solutions. If, after consulting this section, the problem remains unresolved, please contact your dealer for more information and/or help. This troubleshooting section contains information on how to solve the most common DMX light effect problems, but it does not and cannot cover every eventuality.
- Page 16 Signal loss or interference in the Close the DMX circle with a DMX circle terminator or connect a booster after maximum 32 fixtures. The device does not respond well Wrong DMX-channel mode Check to see if the correct DMX to DMX-commands. channel mode is set.
-
Page 17: Technical Specifications
Technical Specifications Basic functions: - Led armature with 7 pixels that can be controlled separately - Metal construction with protective grille for each pixel - Standard U-shaped suspension bracket + mounting materials - 2x quick coupler suspension brackets included - 40W RGBW LED per pixel, with warm white - 12 Built-in shows + 1 random show - Various operating modes - Adjustable dimmer curves... - Page 18 - Blue: 1872 Lux at 1m - White: 1205 Lux at 1m - Full on RGBW: 5820 Lux at 1m Box contents: - Ayra IntenZ CB700 armature - Suspension bracket - Mounting materials (2x tightening knob, 2x rubber ring) - 2x Quick coupler bracket - Connector cable: blue lockable power connector to Schuko, 1.5 mm²...