Laguna Tools Platinum Series Manual page 6

1.1.2. ADDITIONAL SAFETY RULES FOR MILLING MACHINE
1. Proper operation of this machine requires the specific knowledge of the following
instructions and of the risks consequent to improper utilization.
2. Therefore only qualified and authorized personnel must operate the machine. The
operator will be trained on the proper use of the equipment, its protection devices
and accessory tools.
3. Safe operation of the machine is guaranteed only for the functions and materials
indicated in these user's instructions. We decline any responsibility if the machine
is used for purposes outside those indicated in the user's instructions or not
complying with them.
4. We declines any responsibility related to equipment safety, reliability and
performance if warnings and instructions contained in this manual are not observed,
with specific reference to: Equipment utilization, routine and emergency
maintenance, repairs.
5. The manufacturer declines any responsibility if the machine is not properly
connected to the equipotent ground line or if the appropriate circuit breakers are not
installed and coordinated between electrical power lines and the machine, according
to the above Regulations.
6. All protection devices are provided and mounted on the machine appropriately. We
recommend complying with the periodical routine and extraordinary maintenance
scheduled for the protection devices and the entire machine.
7. The operator must wear appropriate working clothes from a safety and operational
point of view. Bracelets, necklaces and other apparel that can get caught in the
machine will not be allowed.
8. It is important to think about potential risks and consequences before approaching
hands to the most dangerous zones such as: Piece locking pistons, Mill cutter, Cams
slide, Electrical control panel.
1-3