4. OPERATION
4.2.2. Adjustment for the thickness of work piece
A
djust the height of locking actuators assembly(A) by rotating adjustment nuts (B),
which allowsraising or lowering such assembly (C).
C
4.2.2. Adjustment of positi
D
etermine the position of work piece for indent
cutting, position horizontal and vertical fixtures (A
and fix them by tightening the screws (C).
Bear in mind that to match the top of drawer
front and side panel edges, such two work piec
must be different in height of half a pitch (e.g.
pitch = 25mm, difference =12.5mm.).
A
B
4
. OPERATION
A
B
on of work piece
C
, B)
es
4-5
4-6