Laguna Tools PP16 XC PRO Owner's Manual
  1. Manuals
  2. Brands
  3. Laguna Tools Manuals
  4. Power Tool
  5. PP16 XC Pro
  6. Owner's manual

Laguna Tools PP16 XC PRO Owner's Manual

10'
Hide thumbs Also See for PP16 XC PRO:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
Owner's Manual
Owner's Manual
PP16|XC Pro 10' Panelsaw
PP16|XC Pro 10' Panelsaw
MPSPP16XC-10-0135
MPSPP16XC-10-0135
lagunatools.com | lagunacleanair.com | supermaxtools.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PP16 XC PRO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Laguna Tools PP16 XC PRO

Summary of Contents for Laguna Tools PP16 XC PRO

  • Page 1 All manuals and user guides at all-guides.com Owner’s Manual Owner’s Manual PP16|XC Pro 10′ Panelsaw PP16|XC Pro 10′ Panelsaw MPSPP16XC-10-0135 MPSPP16XC-10-0135 lagunatools.com | lagunacleanair.com | supermaxtools.com...
  • Page 2 Aside from being free of defects upon receiving, consumable parts, like cutters and abrasives, are not covered by this warranty unless otherwise stated by Laguna Tools. These parts are designed to be used at the expense of the operator and are available for replacement or inventory purchase.

  • Page 3: Table Of Contents

    All manuals and user guides at all-guides.com Table of Contents 1. INFORMATION 1-1. General information……………………………………………………………….. P1 1-2. Safety rules ……………………………………………………………………………. P2 2. MACHINE INFORMATION 2-1. Main Feature………………………………………………………..... P6 2-2. Specification………………………………………………..…………………………. P7 3. INSTALLATION 3-1. Unpacking & Check machine accessories….…………………………… 3-2 Fitting foot brake ..………………….……….……………………………. 3-3.
  • Page 4 All manuals and user guides at all-guides.com Table of Contents 9. PARTS LIST ASSEM01- Machine body & table ASSEM02- Control panel ASSEM03- Power unit ASSEM04- Saw blade angle device ASSEM05- Saw blade rise & fall device ASSEM06- Scoring device ASSEM07- Outrigger arm ASSEM08- Crosscut table ASSEM09- Crosscut fence ASSEM10- Rip fence...

  • Page 5: Information

    All manuals and user guides at all-guides.com 1. INFORMATION General Information We are specialized to supply full range of panel saw from 1600, 2300, 2500, 3200 to 3800mm. The outlook design of this machine is so unique with complete cast iron bracket instead of sheet metal, enlarged outrigger and carriage, direct dust collection outlet.

  • Page 6: Safety Rules

    All manuals and user guides at all-guides.com 1. INFORMATION 1-2. Safety Rules 1) Read instruction manual before operating the machine for your safety. People who operate the machine must be trained, read and understood to use the safety measures, possess the ability to obey, and execute the regulation stated in this manual.
  • Page 7 All manuals and user guides at all-guides.com 1. INFORMATION 12) Have your machine repaired by a qualified person. Repairs should be carried out by qualified-persons using original spare parts; otherwise this may result in considerable danger to the user. 13) Check any damaged parts. Before using the machine further, the guard or other damaged part should first be carefully checked to determine if it will operate properly and perform its intended function.
  • Page 8 All manuals and user guides at all-guides.com 1. INFORMATION buttons are position on the front side on the machine near in-feed working area. The emergency button is colored red and yellow background. After emergency stop, follow the normal start up procedure and suitable operation to obviate the hazard.
  • Page 9 All manuals and user guides at all-guides.com 1. INFORMATION 20mm deep. Push blocks should be used when cutting small work pieces and in circumstances where it is necessary to push the work piece against the fence. b) Selection of saw blade and riving knife- the operator should only select saw blade with suitable diameter and thickness for the machine.

  • Page 10: Machine Information

    All manuals and user guides at all-guides.com 2. MACHINE INFORMATION 2-1. MAIN FEATURE A. Machine Body B. Sliding Table C. Edge Shoe D. Motorized rip fence E. Control panel Overhead guard G. Hold Down With Miter Fence (Optional) H. Crosscut Frame Crosscut Fence Flip Stops K.

  • Page 11: Specification

    All manuals and user guides at all-guides.com 2. MACHINE INFORMATION 2-2. SPECIFICATIONS ITEM MODEL Sliding table dimension 3200x378mm Cast Iron table 548x896mm Extension table (rear) 952x896mm Extension table (front) 830X320mm Table size 1500x1726mm Round rail Φ40mm Main saw blade (Max.) 400mm Main saw bore φ30mm...

  • Page 12: Installation

    All manuals and user guides at all-guides.com 3. INSTALLATION 3- - - - 1. UNPACKING SETUP SAFETY – By offering the comprehensive information regarding to the operation and maintenance of the machine, it will be ensured that operators will use the machine properly. –...
  • Page 13 All manuals and user guides at all-guides.com 3. INSTALLATION IMPORTATNT!! Follow the below steps before operating. Before operating, lift up the scoring motor to remove the fixing wood block from the machine. (Figure 3-1.1) Put on the flat belt to the scoring shaft. Be aware of the movement direction mark on the belt.
  • Page 14 All manuals and user guides at all-guides.com 3. INSTALLATION CHECKS THE MACHINE ACCESSORIES Packing List Saw base Unit x 1 wooden Sliding Table Unit x 1 Assembly parts for crosscut fence x1 Assembly parts for crosscut frame. x1 Assembly parts for motorized rip fence. x3 Assembly parts for left extension table &...

  • Page 15: Fitting Foot Brake

    All manuals and user guides at all-guides.com 3. INSTALLATION Fitting the foot brake 1. Fit the foot brake to the right side of machine body, Remove the cover of the control, loosen the screws on the foot brake to open it, remove the nut at the back side of the brake attach to the machine aim the hole (only 2 holes as shown below) Fasten the nut when attached the brake and finish adjust the position.
  • Page 16 All manuals and user guides at all-guides.com 3. INSTALLATION 3-3.FITTING THE SLIDING TABLE The accessories bag contains hex head bolts for fixing the sliding table For packing and transport reasons, some machine members are removed. All fitting operations in this section require approx. 4 people Note: The parallelism has been adjusted before shipping, users only need to assemble by following the steps below.
  • Page 17 All manuals and user guides at all-guides.com 3. INSTALLATION 3-4. FITTING THE CROSSCUT FRAME & EXTENSION FENCE ASSEMBLY All fitting operations in this section require approx. 2 people I. Fitting the crosscut frame 2. Fit the crosscut frame by putting A (Fig. 3-4.1) into the end of swing arm B(Fig. 3-4.1).
  • Page 18 All manuals and user guides at all-guides.com 3. INSTALLATION 3. Slide the 4 sets of square pads by follow the arrow direction into the groove at the bottom and lock 1 pad at the end (Fig. 3-4.2a) 4. Fit crosscut fence in the groove H (Fig. 3-4.2) and holes on crosscut frame (as Fig 3-4.2b) 5.
  • Page 19 All manuals and user guides at all-guides.com 3. INSTALLATION 3-5. FITTING MOTORIZED RIP FENCE & EXTENTION TABLE...
  • Page 20 All manuals and user guides at all-guides.com 3. INSTALLATION...
  • Page 21 All manuals and user guides at all-guides.com 3. INSTALLATION ADDITIONAL REMARKFITTING THE EXTENSION TABLE All fitting operations in this section require approx. 2 people 1. Fasten the extension table and keep it aligned with cast iron table. Check the flatness use a flat straight gauge or the alum. Rip fence which go with rip fence ( Figure 3-5.7) on the tables as Fig 3-5.12.

  • Page 22: Overhead Saw Blade Guard And Control Panel Fitting

    All manuals and user guides at all-guides.com 3. INSTALLATION 3-6. OVERHEAD SAW BLADE GUARD AND CONTROL PANEL FITTING Overhead saw blade guard fits to saw blade with max dia. of more than 355mm. All fitting operations in this section require approx. 3 people Following is the instruction of assembly.
  • Page 23 All manuals and user guides at all-guides.com 3. INSTALLATION Figure 3-6.6 Figure 3-6.5 Figure 3-6.7 Figure 3-6.8 Figure 3-6.9 H&I A&B Figure 3-6.10...

  • Page 24: Fitting The Saw Blade

    All manuals and user guides at all-guides.com 3. INSTALLATION 3-7. FITTING THE SAW BLADE CAUTION 1. Handle the saw blade with gloves. 2. Open blade protect guard before install the saw blade Procedure for fitting or replacing the saw blade is as follows: 1.
  • Page 25 All manuals and user guides at all-guides.com 3. INSTALLATION Figure 3-7.2c Figure 3-10.2 Figure 3-7.2 Red plate Figure 3-7.2a Figure 3-7.2b Figure 3-7.3a Figure 3-7.3...

  • Page 26: Riving Knife

    All manuals and user guides at all-guides.com 3. INSTALLATION 3-8. RIVING KNIFE CAUTION: Always install the riving knife with gloves. The machine is always equipped with one riving knife for 355mm saw blade. Always fit the proper riving knife: 1. Loosen nut A (Fig. 3-8.1) insert the riving knife with a wrench without complete tightening it.

  • Page 27: Changing Scoring Blade

    All manuals and user guides at all-guides.com 3. INSTALLATION 3-9. CHANGING SCORING BLADE CAUTION: Changing scoring blade with gloves and always pay attention. 1. Press the emergency button 2. Set the scoring blade in 90 degree by turning the hand wheel A (Fig. 3-7.1) 3.
  • Page 28 All manuals and user guides at all-guides.com 3. INSTALLATION Figure 3-9.2...

  • Page 29: 3-10.Edge Shoe

    All manuals and user guides at all-guides.com 3. INSTALLATION 3-10 EDGE SHOE, 3-11 HOLD DOWN & MITER FENCE Edge shoe The edge shoe is used for trimming panel and fixes the work piece on the sliding table. ※ Notice: Edge shoe is demanded in heavy duty processing. Miter Fence with hold down (Optional) Allows precise miter cuts between + 45 and - 45 on the sliding table and clamps the work piece.

  • Page 30: Connection To The Dust Collection

    All manuals and user guides at all-guides.com 3. INSTALLATION 3-12. CONNECTION TO THE DUST COLLECTION The connection to the dust collection is necessary for the good machine operation. Always work with the dust collector in operation. The saw is equipped with two dust ports connected to a dust collection system before operation.

  • Page 31: Wiring & Test Run

    All manuals and user guides at all-guides.com 3. INSTALLATION 3-13. WIRING & TEST RUN WIRING 1. Make sure that the electric system of the workshop may absorb the machine power and the grounding system follows the prescriptions in force. Notice: Comply with local codes to prevent fire accident. 2.

  • Page 32: Operation

    All manuals and user guides at all-guides.com 4. OPERATION 4-1. SAW BLADE LIFTING AND TILTING I. SAW BLADE LIFTING Turn hand wheel B (Fig. 4-1.1) counter clockwise: the saw blade rises. Adjust the saw blade height according to the work piece thickness. The saw blade height must exceeds the piece thickness 1 ~ 1.5cm Set the guard C (Figure 4-1.1a) to a max.

  • Page 33: Scoring Blade Adjusting

    All manuals and user guides at all-guides.com 4. OPERATION 4-2. SCORING BLADE ADJUSTING I. SCORING BLADE HEIGHT ADJUSTING 1. Loosen nut A (Fig. 4-2.1) 2. Turn the knob B (Fig. 4-2.1) till the scoring blade has reached to the height desired, then tighten nut A (Fig.
  • Page 34 All manuals and user guides at all-guides.com 4. OPERATION III. USE OF SCORING BLADE The scoring blade is used to avoid the chipping on the bottom pat of panels coated with finishing material. Take Fig 4-2.3 as reference. A. Single blade: with blade thickness equal to the saw blade one. B.

  • Page 35: Control Panel Operation

    All manuals and user guides at all-guides.com 4. OPERATION 4-3. CONTROL PANEL OPERATION Control panel close-up A. MAIN BLADE ON Button—Start the main saw blade. B. MAIN BLADE OFF Button—Stop the main blade. C. SCORING BLADE ON Button—Start the scoring blade. Note: The main saw blade must be ON for the scoring blade to start.

  • Page 36: Speed Change

    All manuals and user guides at all-guides.com 4. OPERATION 4-4. 3 SPEED CHANGE 1. Set the saw unit down 2. Stop the machine , turn the main switch to 0 ; then lock it and indicating this with a sign 3.
  • Page 37 All manuals and user guides at all-guides.com 4. OPERATION 4-5. SETTING THE RIP FENCE UNIT FOR PARALLEL CUTS Make sure the distance value before operation (Refers to the 3-5)
  • Page 38 All manuals and user guides at all-guides.com 4. OPERATION II. POSITION OF FENCE PLATE 1. Vertical position (Fig. 4-5.4a) turn to the work piece 2. Horizontal position (Fig. 4-5.4b) for cutting thin work piece and for slanting cuts. It will be safer to move the work piece forwards by using pusher. NOTE: For the execution of special working, the operators are obliged to put his hands near the tools.

  • Page 39: Sliding Table

    All manuals and user guides at all-guides.com 4. OPERATION 4-6. SLIDING TABLE CAUTION: Lock sliding table before placing heavy work piece for safe location. The sliding table is moved on high precision sideways which is made of hardened steel for a uniform and smooth motion with less friction and obtain accurate cutting. The sliding table is locked and unlocked by lever A (Fig.
  • Page 40 All manuals and user guides at all-guides.com 4. OPERATION 4-7 SETTING THE CROSSCUT FENCE 1. Turn threaded nut C (Fig. 4-7.1a) to make crosscut fence exactly vertical with sliding table. Then lock knob D (Fig. 4-7.1a) to fix A (Fig. 4-7.1. 2.
  • Page 41 All manuals and user guides at all-guides.com 4. OPERATION I. SQUARE CUTTING TEST 1. Lock all knobs for crosscut fence. 2. Lower the guard, then do test trimming to A, B, C & D (Fig. 4-7.2) of the testing panel. 3.
  • Page 42 All manuals and user guides at all-guides.com 4. OPERATION III. RULE ADJUSTING FOR OBLIQUE CUTS 1. Loosen knob D(Fig. 4-7.4a)& F(Fig. 4-7.4b) to change position of crosscut fence 2. Adjust the position for making sure the right side of the fence A (Fig. 4-7.4) aligning with the desired angle.

  • Page 43: Machine Cleaning & Check

    All manuals and user guides at all-guides.com 5. MACHINE MAINTAINESS 5-1. Machine cleaning & check Before carrying out maintenance, adjustments or demounting any machine member, turn the main switch to 0. Then lock it and indicate this with a sign. The general cleaning can extend life of usage for the machine and it would also affect operation safety.
  • Page 44 All manuals and user guides at all-guides.com 5. MACHINE MAINTAINESS Cleaning & Checking Schedule Weekly Monthly 3-month 6-month Check items Daily yearly Check emergency stop and indicate lamp whether normal or not? Check the integrity of noise, pressure and ventilation of the machine.

  • Page 45: Periodical Lubrication

    All manuals and user guides at all-guides.com 5. MACHINE MAINTAINESS 5-2. PERIODICAL LUBRICATION An accurate lubrication ensures the long life of usage as well as the best performance of the machine. CAUTION Weekly lubricate with grease Disconnect the electrical Worms B (Fig. 5-2.1) and toothed sector A (Fig. and pneumatic system 5-2.2) for height adjusting and tilting of the saw before maintenance...

  • Page 46: Replacing Belt

    All manuals and user guides at all-guides.com 5. MACHINE MAINTAINESS 5-3. REPLACING BELT Disconnect the machine from the electrical and pneumatic system I. REPLACING THE SCORER SPINDLE BELT 1. Remove the rear door 2. Lift the small motor A (Fig. 5-3.1). When the belt is slack, it can be replaced 3.
  • Page 47 All manuals and user guides at all-guides.com 5. MACHINE MAINTAINESS II. REPLACING THE SAW SPINDLE BELTS 1. Set the saw unit 45∘tilted by turning the wheel. 2. Open rear door 3. Loosen knob B(Fig. 5-3.2) 4. Lift lever C (Fig. 5-3.2) of belt stretcher to the left, then the belts are slack and can be replaced.

  • Page 48: Tools List

    All manuals and user guides at all-guides.com 6. TOOLS LIST TOOLS INVENTORY Tool Box Riving Knife 300~355mm Open spanner 19, 24~27,30mm Rob for fixing spindle Push Stick...
  • Page 49 All manuals and user guides at all-guides.com Operation Manual for Automatic Rip Fence (Optional) A. Grooves /concealed cuts Function B. Incremental dimension Function C. Dimension repeat Function D. Blade management E. Switch mm/inch Function. F. Calibration Function G. Numeral Keypad H.
  • Page 50 All manuals and user guides at all-guides.com A. Grooves /concealed cuts ■ 1. Press the "function key" to enter the starting position, 2. Ex. Input 600mm, press F2 input 600mm after height light appear press F2 again when finish 3. The groove width, Ex. 20mm, press F3 input 20mm after height light appear press F3 again when finish **input positive number (greater than zero) : the rip fence move backward, input negative number (less than zero) : the rip fence move forward (close to the blade side) 4.The groove depth, Ex.
  • Page 51 All manuals and user guides at all-guides.com C. Dimension repeat ■ 1. Press function key (the rip fence will memories the last two position if any) 2. Input the first position Ex. 600mm when highlight appears, press the start key to move, save the position, 3.
  • Page 52 All manuals and user guides at all-guides.com 6. Press F5 to save the database you input , otherwise the information can not be record. To delete the database from the blade information list you can press F5 for 3 sec, to delete (bin 7.
  • Page 53 All manuals and user guides at all-guides.com F. Calibration ■ Measure the width of the cut test piece with calipers to check if the size match with the screen display. Press the function key for more than 3 sec. ,after highlight appears in the dimension display. Ex.
  • Page 54 All manuals and user guides at all-guides.com Trouble Shooting Problem Possible cause Trouble shooting Measure the exact size of the cut piece then Press the CAL Possible the rip fence scale is The rip fence scale is not key for more than 3 seconds to out of calibration or was set accurate reset the correct input press...
  • Page 55 All manuals and user guides at all-guides.com 8. TROUBLESHOOTING WARNING-Disconnect the machine from the power source before troubleshooting or serious personal injury could occur. Problem Possible cause Troubleshooting The machine cannot be 1. Door in machine frame or saw 1. Close the machine door or cover plate. switched on.
  • Page 56 All manuals and user guides at all-guides.com 8. TROUBLESHOOTING Problem Possible cause Troubleshooting Motor fails to develop full 1. Power line overloaded with 1. Reduce load on power line. power (output of motor lights, appliances, and other decreases rapidly with motors.
  • Page 57 All manuals and user guides at all-guides.com 8. TROUBLESHOOTING Problem Possible cause Troubleshooting The finished size of the 1. Dimension scale for cutting 1. Reset the flip stop to correct size. cut workpiece does not widths is misadjusted. match the cutting width 2.
  • Page 58 All manuals and user guides at all-guides.com 8. TROUBLESHOOTING Problem Possible cause Troubleshooting Workpiece has chip out 1. Scoring blade height is 1. Adjust the height of the scoring blade. on the bottom edge. incorrect. 2. Scoring blade is not aligned 2.
  • Page 59 All manuals and user guides at all-guides.com...
  • Page 60 All manuals and user guides at all-guides.com...
  • Page 61 All manuals and user guides at all-guides.com...
  • Page 62 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 1.1.26...
  • Page 63 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 1.1.26 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Plate 208190 Hex Head Bolt M10*40 SH100800 Hex Nut NH101700 208095 Machine frame SH121000 Hex Head Bolt M12*50 Lock Washer WS120000 Ring 203410 Lock Washer WS060000...
  • Page 64 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 1.1.26 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Power Box 201105 Power Box WITHOUT CE 201105A Terminal PB2504 4P 994805 994805 Terminal PB2504 4P SP059200 Pan Head Screw M5*8 Button Head Screw M5*12 SJ059300 Strain Relief...
  • Page 65 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 1.2.4 PARTS NAME SIZE Q`TY ITEM PART NO NOTE Set Screw M10*20 SS100400 Hex Nut NH101700 Left Ext. Plate 207077 5655C SR100500 Cap Screw M10*25 Table 207733 Ext. Plate 207078 5655C Washer M10*ψ20 WF102030...
  • Page 66 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 2.15 PARTS NAME SIZE Q`TY ITEM PART NO NOTE Dust Cove R2 PRCF 994855A Switch Button-ON R2 PNF-1A-G 994855 994856 Switch Button-OFF R2 PNF-1B-R Pilot Lamp YK.24V φ22 (W) 996002 Label 207260 Plate 208193...
  • Page 67 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 3.1.5...
  • Page 68 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 3.1.5 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Cap Screw M4*30 SR040600 Hook(L) 207055 Spring 207057 Cover 208091 AB136013 Door Safety Switch ASM Door Safety Switch 101 136012 STOP CORD 102 IC207013 0.75x2Cx2.5Mx3Y1 脫...
  • Page 69 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 3.1.5 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Cap Screw M5*16 SR059400 Lock Washer WS050000 Hex Nut NH050800 Cap Screw M6*10 SR060200 WS060000 Lock Washer Washer M6*ψ16 WF061620 Plate 207936...
  • Page 70 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 3.2.6 PARTS NAME SIZE Q'TY ITEM PART NO NOTE Hex Nut NH142200 Washer M14*ψ35 WF143530 207048 207043 Adjusting Shaft Bushing 200999 Button Head Screw M8*30 SJ080600 Adjusting Screw 207046 Retaining Ring RS100000 207156 Lock Knob...
  • Page 71 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 3.2.6 ITEM PART NO PARTS NAME SIZE Q'TY NOTE SS101100 Set Screw M10*55 Hex Nut NH101700 Washer M10*ψ40 WF104030 Main Motor MH207003 MH207004 Main Motor Y-∆ OPTIONAL WF104030 Washer M10*ψ40 Lock Washer WS100000 Hex Head Bolt M10*40...
  • Page 72 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 3.3.5...
  • Page 73 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 3.3.5 ITEM PART NO PARTS NAME SIZE Q`TY NOTE AB207037 Bracket Assembly Hex Nut M12*1.75 101 NH121900 Washer M16*ψ30 102 WF163030 103 207030 104 207040 Block 105 207037 Bracket Screw 106 207031 Button Head Screw M6*12 107 SJ069300...
  • Page 74 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 4.10...
  • Page 75 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 4.10 ITEM PART NO PARTS NAME SIZE Q'TY NOTE 100203 Lock Knob Washer 204263 ψ10×ψ20 Washer M10×ψ27 WF102730 Washer M10×ψ40 WF104030 OPTIONAL 206434A hand wheel 8" hand wheel 8" 200866 OPTIONAL 7x7x20 KS070720 AB207462...
  • Page 76 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 4.13 PARTS NAME SIZE Q'TY ITEM PART NO NOTE Cap Screw M8*20 SR080400 WS080000 Lock Washer Lock Washer M8xψ18 WF081818 Plate 207656 Rack 207654 Washer M6*ψ16 WF061620 Lock Washer WS060000 Cap Screw M6*20 SR060400 Counter Sunk Screw...
  • Page 77 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 5.7...
  • Page 78 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 5.7 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Lock Knob 100203 Washer 204263 ψ10×ψ20 Washer M10×ψ27 WF102730 WF104030 Washer M10×ψ40 OPTIONAL 206434A hand wheel 8" hand wheel 8" 200866 OPTIONAL 7x7x20 KS070720 Washer...
  • Page 79 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 5.7 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Worm Gear(L) 203 207097 Thrust Bearing NTB2035+AS 204 994203 Washer 205 205013 206 207098 Cover Bracket 207 994203 Thrust Bearing NTB2035+AS Worm Shaft 208 207379 Thrust Bearing NTB2035+AS...
  • Page 80 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 6.1 PARTS NAME SIZE ITEM PART NO Q'TY NOTE Hex Nut M18*1.5p 207024 207796 Flange Shaft Assembly AB207794 Int. Retaining Ring 101 RR420000 Wave Washer 102 WW304003 ψ30.1*ψ40.6 t=0.3 ( 6302 ) Ball Bearing 6004LLB 103 BB600404...
  • Page 81 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 6.2.4 PARTS NAME SIZE Q`TY ITEM PART NO NOTE Setscrew M8x20 SS080400 Spring 207041 207032 Shaft SS069300 Setscrew M6*12 Ring 207033 Ring 207034 Washer M8*ψ30 WF083030 WS080000 Lock Washer...
  • Page 82 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 6.2.4 ITEM PART NO PARTS NAME SIZE Q`TY NOTE SR089400 Cap Screw M8*16 Hex Head Bolt M6*16 SH069400 Block 207036A Washer M6*ψ13 WF061310 WS060000 Lock Washer NH061000 Hex Nut Screw Threads ASM AB207675 Block 101 207035...
  • Page 83 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 6.3 PARTS NAME SIZE Q'TY ITEM PART NO NOTE Spring 207072 207052 Fix Pole Cap Screw M8*45 SR080900 Lock Washer WS080000 Washer M8*ψ18 WF081818 Hex Nut NH081300 MH207002 Motor 5*5*30 KS050530 Pulley 50HZ 201028...
  • Page 84 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 7.6...
  • Page 85 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 7.6 ITEM PART NO PARTS NAME SIZE Q'TY NOTE Magnet 206647 Screw Threads 205505B Hex Nut M20x2.5p NH203000 203470 Plug 40*120 SI051100 Counter Sunk Screw M5*55 Magnetic Bracket 206646 Sliding Tube 205208 Hex Head Screw M8*20...
  • Page 86 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 8.1...
  • Page 87 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 8.1 ITEM PART NO PARTS NAME SIZE Q`TY NOTE 201103 T-Nut M8x1.25p Plug HP-16 203230 Handle 203128 T-Block 201456 200815 Adjust Handle M12x1.75px57L 200954 Knob Screw M8x50 Knob Screw M8x50 200954 Support Frame ASM AB207996R Bearing...
  • Page 88 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 9.3 PARTS NAME SIZE Q`TY ITEM PART NO NOTE Flip Stop Assembly AB207207 Pipe 101 207223 102 207203 Shaft 103 207207 Flip Stop Washer 104 207208...
  • Page 89 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 9.3 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Knob M8x1.25px42L 105 207263 Washer M8x20x1 106 200472 Washer M8x18 107 WF081818 108 207235 109 207200 Stop Bracket 110 207201 Pipe 111 207223 Magnifier 112 207202 AB207205...
  • Page 90 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 10.7...
  • Page 91 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 10.7 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Fixed Base 203131 Fixed Base 203296 Pan Head Screw M5*45 SP050910 203297 Push-Button Switch 203481 Corrugated Tubing Fitting N-MGW16-15B-ST Plastic Corrugated Tubing NGN-12B 203475 Thrust Washers...
  • Page 92 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 10.7 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Plastic Corrugated Tubing 203888 NGN-23B Cover 203851 Cover 207673 WF041008 Washer M4*ψ10 SP049100 Pan Head Screw M4*6 Button Head Screw M3×6 SJ039100 Cap Screw M5*16 SR059400...
  • Page 93 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 10.7 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Eccentric Shaft 203213 Handle 200884 Thrust Bearing 994214 RS200000 Retaining Ring 203356 Ring Washer M6*ψ19 WF061920 Eccentric Bushings 203195 Ball Bearing 6202ZZ BB620202 WS060000 Lock Washer...
  • Page 94 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 10.7 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Control panel cord 2.5 6P 218 IC207056 0.4M 22AWGx16Cx200M 0.01 219 IC205023 22AWGx9Cx200M 0.0375 220 IC205021 7.5M 221 IC205041 0.5x2Cx100M 0.051 222 205416 Fuse block Cover 223 205416-01...
  • Page 95 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 12.1 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Hood Assembly AB205075 Hood 101 205075 Screw M3×16 102 ST029404 Screw M3×12 103 ST029304 104 205076 Hood Screw M5×10 105 203110 Shaft 106 205124 Lock Nut 107 NL101700...
  • Page 96 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 12.10 (OPTIONAL)
  • Page 97 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 12.10 (OPTIONAL) ITEM PART NO PARTS NAME SIZE Q`TY NOTE Lock Nut NL101700 Gas Expansion Cylinder 205004 Washer M10*ψ20 WF102020 SR060400 Cap Screw M6*20 WS060000 Lock Washer Fixed Plate 207987 207970 Hose Clamp 3-1/4"...
  • Page 98 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 12.10 (OPTIONAL) ITEM PART NO PARTS NAME SIZE Q`TY NOTE Square Tube 207971 Plate 207973 Cap Screw M6x10 SJ060200 WS060000 Lock Washer 992627 Copper Washer ψ24*ψ16*0.3t Shaft 207975 Rear Cover ASM AB207866 Tap Screw M3.5x25...
  • Page 99 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 12.6.2 PARTS NAME SIZE Q`TY ITEM PART NO NOTE Fixed Bracket 207770 SR080500 Cap Screw M8x25 WS080000 Lock Washer Washer M8x18 WF081818 Fixed Bracket 207774 Hex Nut NH203000 203338 Washer ψ22*ψ60*t8 205116 Screw M20*130...
  • Page 100 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 12.6.2 ITEM PART NO PARTS NAME SIZE Q`TY NOTE 201039 OPTIONAL Cap Screw M8x16 SR080400 Lock Washer WS080000 WF081818 Washer M8x18 207773 Bolt Washer M16x40 WF164030 Fixed Bracket 207769 Lock Nut NL162400 WS050000 Lock Washer...
  • Page 101 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 12.6.2 ITEM PART NO PARTS NAME SIZE Q`TY NOTE Cap Screw M5×10 SR050200 Plastic Corrugated Tubing 204196 NGN-12B NFE-08B Strain Relief N-MGQ32-34B 998808 150527 2x300x7.5(M/M) SR060400 Cap Screw M6*20 Lock Washer WS060000 Washer M6×ψ16...
  • Page 102 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 13.1 PARTS NAME SIZE Q`TY ITEM PART NO NOTE Gear Wheel 203017 PP105000 ψ10*50 Encoder Fixed Plate 207658 WF061620 Washer M6*ψ16 Lock Washer WS060000 Button Head Screw M6*12 SJ069300 Cover 207655 Encoder Shaft Ring 207747 203154...
  • Page 103 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 14.1 PARTS NAME SIZE Q`TY ITEM PART NO NOTE Down Press ASM D,E,M AB207065-2 101 207143 Adjust Handle Ball Knob M8×P1.25 102 100271 Handle Bar 103 207070 104 207067 Ext. Retaining Ring 105 RS140000 106 207069 Spring...
  • Page 104 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 14.2 ITEM PART NO PART NAME SIZE Q`TY NOTE 205264 Block Handle 200939 Set Screw M8×16-D TYPE old 203238 OPTIONAL Set Screw M8×25-D TYPE new 206618 OPTIONAL Set Screw M8x25-C TYPE SS080500 OPTIONAL 203720...
  • Page 105 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 14.3 PARTS NAME SIZE Q`TY ITEM PART NO NOTE Edge Shoe Plate Assembly AB205455X1 Edge Shoe Plate 101 205455 Spring Pin 102 PS051800 φ5xφ18 103 WF102025 Washer M10x25 Knob 104 203718 T-Nut M10x1.5p 105 201829...
  • Page 106 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 14.4.5...
  • Page 107 All manuals and user guides at all-guides.com MPSPP16CX-10-0135 ASSEM 14.4.5 ITEM PART NO PARTS NAME SIZE Q`TY NOTE 200814 Fasten Handle Flat Washer M8×ψ30 WF083030 Fence Plate 200526 Spring plungers with ball M4×9- B TYPE 201632 OPTIONAL AC198170B1 Miter Gauge Assembly OPTIONAL AC198170D Miter Gauge Assembly...
  • Page 108 Laguna Tools is not responsible for errors or omissions. Specifications subject to change. Machines may be shown with optional accessories. © 2018, Laguna Tools, Inc. LAGUNA® and the LAGUNA Logo® are the registered trademarks of Laguna Tools, Inc. All rights reserved.

Table of Contents