Table of Contents
Advertisement
This machine is designed and manufactured for easy operation and maintenance.
Design technical solutions, materials used, protective coatings, were planned to reduce
maintenance requirements.
Nevertheless we recommend performing a set of tasks with the aim to grant
machine safety, reliability and efficiency in the long run.
5
.1. ROUTINE MAINTENANCE
The machine must be performed
Clean machine bed with compressed air.
Verify status of electric power cord, which
Check mill cutters wear.
Verify debris level in pneum
5
.2. PERIODIC MAINTENANCE
To be carried out weekly.
Verify safety of electrical in
differential safety circuit breaker, continuity of protection cable.
Check proper locking of all mechanical elements of machinery.
Periodically lubricate and oil all joints subject to seizure, particula
plates and the sliding bar of the mill cutter unit.
Lubricate bearings on mill spindle.
5
.3. LIST OF RRECOMMENDED LUBRICANTS
R
eduction gear
Cams
Spindle bearings
Ball bushings
F.R.L
daily at the end of utilization.
should not show cuts or abrasion.
atic system filter collection tank.
stallation: electrical insulation, working conditions of
MOBIL GEAR 632
MOBIL VACTRA NO.2 Oil
KLUBER ISOFLEX LDS 18
MOBIL Mobiles No.2 Oil
MOBIL D.T.E Oil Medium
rly the cams
SPECIAL A Grease
Advertisement
Table of Contents
