Tractor Set Assembly - Raven SBGUIDANCE SMARTRAX MD Installation Manual

1 TRACTOR SET ASSEMBLY

It is recommended to assemble the tractor set in the
following order:
1. Mount the entire wiring harness from the
battery and steering controller.
2. Mount the wheel angle sensor and cable.
3. Mount the GPS antenna and radio/GSM
antennas and all antenna cables.
4. Mount the DynamIQ ISO and STU
5. Mount the Mechanical Drive unit
6. Mount the terminal.
PAGINA 11/48 | Installation manual | 016-8000-098EN | Rev. A
3
5
6
4
1
TRACTOR SET ASSEMBLY | SBGUIDANCE | SMARTRAX MD
2
FIGURE 1 OVERVIEW SMARTRAX MD