Setting The Time Alarms (Alarm 1-3) - i-SENS CareSens N Owner's Booklet

Setting the Time Alarms (alarm 1–3)
Step 1
Without inserting a test strip, press the
button and the S button simultaneously for
3 seconds to enter the time alarm mode.
'alarm 1' will be displayed while 'OFF' blinks
on the screen.
Step 2
On pressing the button, 'alarm 1' is set and
'On' is displayed on the screen. Press the
button again to cancel 'alarm1' . 'OFF' will
blink on the screen.
Step 3
Press the button to adjust the time of
'alarm 1' .
A number representing the time will blink
on the screen. Press the button to set the
time.
Press the button to end.
46 www.i-sens.com
Step 4
On pressing the button, the number
indicating the minute will start blinking.
Press the button to set the accurate
minute.
Step 5
Press the S button to finish and to go to
'alarm 2' mode.
Repeat steps 2 to 5 to set the remaining
time alarms (alarm 2-3).
Step 6
Press the S button for 3 seconds to finish and turn the meter
off.
www.i-sens.com 47