Switch And Jumper Settings; Table A-1. Factory Default Settings And Available Configurations For Gpib-Pcii Mode; Table A-2. Factory Default Settings And Available Configurations For Gpib-Pciia Mode - National Instruments GPIB-PCII Getting Started

Appendix A Changing Hardware and Software Configuration Settings

Switch and Jumper Settings

Table A-1 shows the factory settings and available configurations for the
switches and jumpers on the GPIB-PCII/IIA in GPIB-PCII mode. Table
A-2 shows the factory settings and available configurations for the switches and
jumpers in GPIB-PCIIA mode.
Table A-1. Factory Default Settings and Available Configurations for
GPIB-PCII
Base I/O Address (hex)
DMA Channel
Interrupt Line (IRQ)
7210/9914 Mode
Shield Ground
Table A-2. Factory Default Settings and Available Configurations for
GPIB-PCIIA
Base I/O Address (hex)
DMA Channel
Interrupt Line (IRQ)
7210/9914 Mode
Shield Ground
© National Instruments Corp.
GPIB-PCII Mode
Default
2B8 000 to 3F8
1 1, 2, 3, and Not Used
7 2, 3, 4, 5, 6, 7, and
Not Used
7210 7210 and 9914
Connected Connected, disconnected
GPIB-PCIIA Mode
Default
2E1 2E1, 22E1, 42E1,
and 62E1
1 1, 2, 3, and Not Used
7 2, 3, 4, 5, 6, 7, and
Not Used
7210 7210 and 9914
Connected Connected, disconnected
A-3 PCII/IIA and NI-488.2 MS-DOS
Available
Available