Table of Contents
Advertisement
Chapter 1
Unpacking Your GPIB-PCII/IIA
Follow these steps when unpacking your GPIB-PCII/IIA.
1. Verify that the pieces contained in the package you received match the
kit parts list given earlier in this chapter. Do not remove the board
from its plastic bag at this point.
2. Your GPIB-PCII/IIA board is shipped packaged in an antistatic plastic
bag to prevent electrostatic damage to the board. Several components
on the board can be damaged by electrostatic discharge. To avoid such
damage in handling the board, touch the plastic bag to a metal part of
your computer chassis before removing the board from the bag.
3. Remove the board from the bag and inspect the board for loose
components or any other sign of damage. Notify National Instruments
if the board appears damaged in any way. Do not install a damaged
board into your computer.
© National Instruments Corp.
1-5
PCII/IIA and NI-488.2 MS-DOS
Introduction
Advertisement
Table of Contents
