National Instruments GPIB-PCII Getting Started page 50

Changing Hardware and Software Configuration Settings
Table A-3. PC I/O Address Map (continued)
I/O Address
Range (Hex)
218 LIM Expanded Memory Card
219 to 21E
21F Reserved
220 to 23F AT-MIO-16
240 to 25F AT-DIO-32F
248 LIM Expanded Memory Card
258 LIM Expanded Memory Card
260 to 27F LabPC (default)
259 to 267
268 LIM Expanded Memory Card
269 to 277
278 to 27F AT Parallel Printer Port 2
280 to 29F WD EtherCard+ (default)
2A0 to 2A7
2A8 LIM Expanded Memory Card
2A9 to 2AF
2B0 to 2DF PC, AT EGA (alternate)
2B8 LIM Expanded Memory Card, GPIB-PCII (base)
2B9 to 2BF
2C0 to 2DF AT-GPIB board 0 (default)
2E0 to 2FF AT-GPIB board 1 (default)
2E1 IBM GPIB Adapter 0, GPIB-PCIIA (base)
2E2 to 2E3 IBM Data Acquisition Adapter 0
2E4 to 2E7
2E8 LIM Expanded Memory Card
2E9 to 2F7
2F8 to 2FF PC, AT Serial Port 2 (COM2)
PCII/IIA and NI-488.2 MS-DOS
Device
A-10 © National Instruments Corp.
Appendix A
(continues)