Chapter 1 Introduction; Figure 1-1. Gpib-Pcii/Iia Interface Board - National Instruments GPIB-PCII Getting Started

Chapter 1
Introduction
This chapter contains a picture of the GPIB-PCII/IIA interface board, lists
the contents of your GPIB-PCII/IIA kit and optional equipment, and
contains instructions for unpacking your GPIB-PCII/IIA.
The GPIB-PCII/IIA is a half-size IEEE-488 interface board for the IBM PC,
PC/XT, PC AT and compatible computers (herein referred to as the PC). It
is built using the custom-designed NAT4882 integrated circuit to achieve
functionality and dependability previously unavailable.
The GPIB-PCII/IIA interface board combines the functionality of the
National Instruments GPIB-PCII and GPIB-PCIIA interface boards. This
interface board can be configured to function as either a GPIB-PCII or a
GPIB-PCIIA, depending on the setting of the configuration switches.
Figure 1-1 shows the GPIB-PCII/IIA interface board in PCII mode.
Art not available in PDF version of document.

Figure 1-1. GPIB-PCII/IIA Interface Board

© National Instruments Corp. 1-1 PCII/IIA and NI-488.2 MS-DOS