Table of Contents
Advertisement
Chapter 1
What Your Kit Should Contain
Your kit should contain the following components:
• GPIB-PCII/IIA interface board set for one of the
following modes:
- GPIB-PCIIA
or
- GPIB-PCII
• For the GPIB-PCIIA, one of the following sets of
diskettes:
- 3.5 in. NI-488.2 Distribution Diskette for
GPIB-PCIIA MS-DOS/Windows Handler,
BASICA, QuickBASIC, BASIC, C & Universal
Interfaces
- Two 5.25 in. NI-488.2 Distribution Diskettes for
GPIB-PCIIA MS-DOS/Windows Handler,
BASICA, QuickBASIC, BASIC, C & Universal
Interfaces
• For the GPIB-PCII, one of the following sets of
diskettes:
- 3.5 in. NI-488.2 Distribution Diskette for
GPIB-PCII MS-DOS/Windows Handler, BASICA,
QuickBASIC, BASIC, C & Universal Interfaces
- Two 5.25 in. NI-488.2 Distribution Diskettes for
GPIB-PCII MS-DOS/Windows Handler, BASICA,
QuickBASIC, BASIC, C & Universal Interfaces
NI-488.2 MS-DOS Software Reference Manual
Getting Started with Your GPIB-PCII/IIA and the
NI-488.2 MS-DOS Handler
Universal Language Interface Using HP-Style Calls
Using Your GPIB Software with Microsoft Windows
© National Instruments Corp.
Component
1-3
Introduction
Part Number
181065-01
181065-02
422764-66
420761-66 and
420762-66
422763-66
420759-66 and
420760-66
320282-01
320320-01
320135-90
320319-01
PCII/IIA and NI-488.2 MS-DOS
Advertisement
Table of Contents
