Table of Contents
Advertisement
Chapter 1
Introduction
What You Need to Get Started
To set up and use the BNC-2140 device, you need the following:
❑
❑
❑
❑
❑
For more information, refer to
Instruments Application Note 25, Field Wiring and Noise Considerations
for Analog Signals.
Unpacking
The BNC-2140 is shipped in an antistatic plastic package to prevent
electrostatic damage to the device. Several components on the device can
be damaged by electrostatic discharge.
Caution
Never touch the exposed pins of connectors.
To avoid damage in handling the device, take the following precautions:
•
•
•
Remove the device from the package and inspect the device for loose
components or any other sign of damage. Notify National Instruments if the
device appears damaged in any way. Do not install a damaged device onto
your computer.
BNC-2140 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
BNC-2140
One of the following DSA devices and its documentation:
–
NI PCI 4451
–
NI PCI 4452
–
NI PCI 4551
–
NI PCI 4552
BNC-2140 User Manual
Your computer
SHC68-C68-A1 analog cable
ni.com/appnotes.nsf
Ground yourself with a grounding strap or by holding a grounded
object.
Touch the plastic package to a metal part of your computer chassis
before removing the device from the package.
Never touch exposed connector pins.
1-2
for the National
ni.com
Advertisement
Table of Contents
