Figure 41: Bios Advanced Menu - Display Configuration - Kontron 3.5"-SBC-WLU User Manual

Figure 41: BIOS Advanced Menu - Display Configuration

Main
Display Configuration
Primary Display
Internal Graphics*
Aperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
Active LVDS
LVDS Panel Type
LVDS Panel Color Depth
PWM Backlight Control
LVDS Backlight Control Mode
LVDS Backlight Control - PWM**
LVDS Backlight Control - Voltage***
* This item is selectable only when selecting PEG for the Primary Display.
** This item appears only when selecting PWM for the LVDS Backlight Control Mode.
*** This item appears only when selecting Voltage for the LVDS Backlight Control Mode.
Feature
Primary Display
Internal Graphics
Aperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
Active LVDS
LVDS Panel Type
www.kontron.com
BIOS SETUP UTILITY
Advanced Power
[IGFX]
[Enabled]
[256MB]
[32M]
[256MB]
[Enabled]
[1366x768 1CH]
[18Bit]
[By External]
[PWM]
127
[2.5 V]
Version 2.20.1275. Copyright (C) 2020, American Megatrends, Inc.
Option
[IGFX], [PEG]
[Disabled], [Enabled]
[128MB], [256MB],
[512MB], [1024MB],
[2048MB]
[32M], [64M], [4M],
[8M], [12M], [16M],
[20M], [24M], [28M],
[32M], [32M/F7],
[36M], [40M], [44M],
[48M], [52M], [56M],
[60M]
[128M], [256M], [MAX]
[Disabled], [Enabled]
[800x600 1CH],
[1024x768 1CH],
[1280x1024 2CH],
Boot
Description
Select which of IGFX / PEG Graphics device should be Primary
Display.
Keep IGFX enabled based on the setup options.
Select the Aperture Size.
Note: Above 4GB MMIO BIOS assignment is automatically
enabled when selecting 2048MB aperture. To use this feature,
please disable CSM Support.
Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size
used by the Internal Graphics Device.
Select DVMT 5.0 Total Graphic Memory size used by the Internal
Graphics Device.
Select the Active LVDS Configuration.
[Disabled]: VBIOS does not enable LVDS.
[Enabled]: VBIOS will enable LVDS.
LVDS panel by selecting the appropriate setup item.
3.5"-SBC-WLU - User Guide, Rev. 1.0
Security Save & Exit
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
// 63