7.7. Audio Input / Output Pin Header (CN10)
The audio input / output pin header provides audio output (Line-Out), audio input (Line-In) and microphone (Mic-In)
signals through the 12-pin 2.54 mm pitch wafer CN10. The audio output signals are shared with those of the speaker
connectors CN11 & CN20.
Figure 17: Audio Input / Output Pin Header CN10
Table 22: Pin Assignment CN10
Pin
Signal
1
MIC-In_L
2
MIC-In_R
3
MIC-In_JD#
4
GND
5
Line-In_L
6
Line-In_R
7
Line-In_JD#
8
GND
9
Line-Out_L
10
Line-Out_R
11
Line-Out_JD#
12
GND
7.8. Front Panel Pin Header (FP1 & FP2)
The 8-pin 2.54 mm pitch front panel pin header FP1 supplies signals for the reset button, storage LED and system
warning speaker.
The 10-pin 2.54 mm pitch front panel pin header FP2 supplies signals for the power button, power LED, and SM Bus.
Figure 18: Front Panel 1 Pin Header FP1
Table 23: Pin Assignment FP1
www.kontron.com
Description
Microphone input left channel signal
Microphone input right channel signal
Microphone jack detection
Ground
Audio input left channel signal
Audio input right channel signal
Audio input jack detection
Ground
Audio output left channel signal
Audio output right channel signal
Audio output jack detection
Ground
RSTBTN
HLED
1
2
11
12
+
1
2
+
-
SPKR
+
8
-
7
-
3.5"-SBC-WLU - User Guide, Rev. 1.0
Note
// 34