Configuring CCTV network
2.3.2
Configuration checklist of CCTV network
Building Technologies
Fire Safety & Security Products
Fig 5
CCTV connections
Before starting the configuration, get in contact with the CCTV specialist and get
the necessary information. Namely:
– Configuration schematic (block diagram or wiring diagram)
– Camera and Monitor types and names
– SIMATRIX and SISTORE models
– IP addresses and bus addresses
Then, in setting up the video network, follow the sequence illustrated by the check-
list below.
1. Configure Cameras
2. Configure Monitors
3. Configure TELSCAN/IP cameras
4. Configure SIMATRIX crossbars
5. Configure SISTORE DVR units
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
p. 10
p. 13
p. 15
p. 19
p. 25
9
06.2010