Nice Dvr Configuration; Configuration Checklist; Configuration Procedure - Siemens DMS8000 MP4 Series Connectivity Manual

3.5 NICE/RIVER DVR configuration
3.5.1

Configuration checklist

3.5.2

Configuration procedure

8
Building Technologies
Fire Safety & Security Products
Verify that you have satisfied the items needed in the first checklist before proceed-
ing to the configuration procedure that follows.
ITEMS NEEDED FOR CONFIGURATION
The NR Video driver installed and configured under the Video Network Manager
in Composer
The DVR IP address
The camera connections
Plug-ins needed:
Plug-ins 258501 (NR driver) and 358201 (NICE/RIVER ST), which must be
–
installed before you can configure your system
The configuration of NICE and RIVER units is similar to the one for SISTORE DVR
that is described in the Video Connectivity Guide (doc.no. A6V10062457), although
the CCTV architecture can include multiple Video Drivers installed on various ma-
chines (MM8000 FEPs) on the network.
The following are the configuration procedures for a DVR unit:
Adding the folder for the DVR system
• Optionally, create a folder for the DVR unit.
Adding the DVR node
1. Select the new folder.
2. Click the Video menu
3. Select the NICE icon
Linking the DVR node
1. Expand the node structure including the NR Video Driver:
Supervisor System Settings
<Station name>
2 Select the DVR node.
3. Drag and drop the link to the Video Driver.
Configuring the DVR IP address
1. Select the new DVR node and click the Node tab.
Note: By default, the node will be named 'Nice #nn' or 'River #nn'. In the Node
tab, you can customise the Description text.
2 In the Setting section, enter the IP address,
which should match the value locally set in the DVR unit.
or RIVER icon to add a DVR node
MM8000 System
Video Network Manager
DMS8000 Video Connectivity Configuration Guide –NICE Add-on
Physical configuration
06.2009