Siemens DMS8000 MP4.30 Connectivity Manual page 24

22
Building Technologies
Fire Safety & Security Products
Note: in SIMATRIX, there are three types of alarm points, depending on the
type of alarm reset that the unit expects. They include:
Stack alarms, which are associated to the CCTV monitors with a shifting
–
technique (the alarmed cameras are shown on the monitors according to
a programmed priority), and then reset by switching the monitor to an-
other camera. Only the "top of stack" alarm can be reset;
Automatic reset when the alarm contact is back to normal;
–
Manual reset from DMS operators.
–
In the SIMATRIX configuration (and consequently in Composer), you can
use only one of the three alarm types.
Fig 14 How to add SIMATRIX alarm points
A Click this icon to add a stack alarm
B Click this icon to add an automatic reset alarm
C Click this icon to add a manual reset alarm
Connecting the cameras (Video network model only)
1. Select and expand the SIMATRIX node.
2. Select and expand the SIMATRIX Video-in folder.
3. Select and expand the Video Camera folder.
4. Select the video-out node of the camera.
5. Drag and drop the Video Out signal to the SIMATRIX Video In node (Fig 15).
Fig 15 Connecting cameras to SIMATRIX
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
Configuring CCTV network
06.2010