Siemens DMS8000 MP4.30 Connectivity Manual page 26

24
Building Technologies
Fire Safety & Security Products
– 2400 baud
– 8N1 (8 Data bits, No parity, 1 Stop bit)
The SIMATRIX software provides two template data files, LMS_1 (16) or LMS_6 (64)
depending on the SIMATRIX model, which already include the configuration options
required for the CDDL/CDSF communication. Please refer to these examples.
Limitations

The SIMATRIX sends out an alarm input Quiet status upon a DMS8000 host
restart (status request) and after switching the matrix OFF and then ON again.
This results in all alarms being cleared in the DMS8000 host but not on the SI-
MATRIX (alarm may still be present).

Currently, PTZ commands are not supported.
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
Configuring CCTV network
06.2010