Siemens DMS8000 MP4.30 Connectivity Manual page 29

Configuring CCTV network
SISTORE AX model
SISTORE AX IP ad-
dress: read it in the
'Local Setup / Remote
Site' page of the RAS
software
SISTORE AX Admin
user: find it in the 'Local
Setup / Remote Site'
page of the RAS soft-
ware
Building Technologies
Fire Safety & Security Products
Note: the button Set Default Value can be used to reset any change in the
fields above and go back to the factory setting.
3 Additionally, set the Admin (or Administrator for MX/MX-Pro)
account password, and TCP port for:
– Displaying live video images ('Display').
– Retrieving archived video images ('Playback').
Note: these usernames and passwords must match the corresponding account
configuration set in the SISTORE software in order to enable M8000 to access
the video functions over the network. You can found the usernames (password
will not be shown and must be asked to the CCTV manager) in the following
ways:
– AX: the required user account (the same can be used for both 'Display' and'
Playback') is the one used by the SISTORE AX RAS software: 'Local Setup'
(the first button next to the SISTORE AX title of the main window) in the
Remote Site entry (locate and select the AX unit in the list) for the Login
Setup (the configuration form).
– MX / MX (NVS) / MX Pro: the required user account can be found in the
'Administration  Configuration User Management' of the SISTORE MX
Pro software.
– SX / CX: the required user account can be found in the user 'Administration
Client' program of the SISTORE SX/CX.
Failing to set the same usernames and passwords results in errors being reported by
MM8000 when video is requested in event treatment and plant browser operations.
Fig 18 SISTORE AX settings and main parameters
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
27
06.2010