Configuring A Philips/Burle Cctv Switcher; Configuration Checklist - Siemens DMS8000 MP4.30 Connectivity Manual

Configuring CCTV network
2.9

Configuring a Philips/Burle CCTV switcher

2.9.1

Configuration checklist










Building Technologies
Fire Safety & Security Products
DMS8000 products support the LTC8000 family of Philips/Burle CCTV switchers.
The LTC8000 family includes various switching units ranging from 8 to 4096 cam-
era inputs and from 2 to 512 monitor outputs. Alarms inputs (8 to 1024) are also
supported for triggering alarm-handling switching procedures.
Verify that you have satisfied the items needed in the first checklist before proceed-
ing to the configuration checklist that follows.
ITEMS NEEDED FOR CONFIGURATION
The number and type of LTC8x00 units.
The switcher parameter settings, which can be provided in two ways:
The LMSmodular databases DB_PUL.DBF and DB_SUB.DBF to import;
–
Complete information about the CCTV configuration, including cameras, monitors,
–
and alarm inputs.
The connection to the DMS (via NK8000).
Note: The NK8000 requires a serial line available on the gateway.
Plug-ins needed:
Plug-in #352301, which must be installed before you can configure your system.
CONFIGURING A PHILIPS/BURLE CCTV SWITCHER
1. Add the folder(s) required to identify the location of the CCTV unit in the project
structure tree
2. Add the Philips/Burle CCTV switcher node to the new folder
3a. Import the DMS7000 or LMS database, if available
-- Or --
3b. Define the detailed configuration of the switcher, adding cameras, monitors, and
alarm inputs
4. Link the switcher to the assigned NK8000 port
5. Repeat steps 1 to 4 for all the Philips/Burle CCTV switchers in the project
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
p. 34
p. 34
p. 34
p. 35
p. 36
33
06.2010