Siemens DMS8000 MP4.30 Connectivity Manual page 37

Configuring CCTV network
Building Technologies
Fire Safety & Security Products
In a few moments, the CCTV structure is imported, and the node is repre-
sented in the Composer tree.
Defining the switcher detailed configuration
If no configuration can be imported, you will need to configure the switcher by hand
to reflect the actual hardware configuration. The following list shows where differ-
ent items are located in the physical and logical trees in Composer.
1. Select the switcher node.
2. Select the sub-nodes cameras and add the video camera nodes
( see Fig 28).
3. Select the sub-nodes alarm inputs and add the alarm input nodes
( see Fig 29).
4. Select the sub-nodes monitors and add the monitor nodes
( see Fig 30).
Fig 28 Adding cameras to Philips/Burle switcher
Fig 29 Adding alarm inputs to Philips/Burle switcher
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
35
06.2010