40
Building Technologies
Fire Safety & Security Products
Configuring the viewer
1. Select the new device node and then the associated Node tab.
2. In case HTML-based viewer (Fig 35), enter the file path of the local HTML page
(note that HTTP protocol is not supported)
-- OR --
in case of installed application, enter the Application path and, optionally, the re-
lated launch parameters (Fig 36).
Note that the viewer application should be installed on all the MM8000 client stations
using the same installation folder.
Fig 35
Configuring the web-based viewer
Fig 36
Configuring the application viewer
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
Configuring CCTV network
06.2010