Procedures; Setp1 Edid Resolution Setting - NovaStar MCTRL660 User Manual

Hide thumbs Also See for MCTRL660:

Table of Contents

7 Procedures

MCTRL660 is powerful and the operation is very simple. In general, the display can be started and

normally used after the user complete the first three steps. Other options in advanced setting can be

selectively set so as to achieve a better display. Please refer to

The function can be used to set the output resolution of video card. In general, the content shown in

screen cannot exceed the output resolution of video card.

Enter the menu "Advanced Setting" to set the resolution of video source. It can be achieved in two

modes: preset resolution selection and user-defined resolution.

Mode 1: Preset resolution setting

Select proper resolution and refresh rate among the standard resolutions preset in controller. If there is no

proper preset value, mode 2 user-defined resolution can be selected.

www.novastar.tech

is in key and knob function locking state.

Indicate that the resolution is 1920 x 1080 pixels

and that the frame frequency is 60 Hz.

Controller MCTRL660 User's Manual

7.4 Advanced

Setting.

Table of Contents

Show Quick Links

Table of Contents