NovaStar MCTRL660 User Manual page 25

Controller MCTRL660 User's Manual
Current Serial Port
Select the serial port through which the hardware to be updated is connected to the computer.
Program Path
Select the program to be loaded to the hardware here.
Sending Board MCU
Select this option if the MCU program of a sending board is to be updated.
Sending Board FPGA
Select this option if the FPGA program of a sending board is to be updated.
Scan Board FPGA
Select this option if the FPGA program of a scan board is to be updated.
Update
Click this button to load the selected program to the selected hardware.
Refresh All
If this option is selected, the version information of all sending boards and scan boards connected to the
current serial port will be refreshed when the Refresh button is clicked.
Set position
If this option is selected, only the version information of the selected scan board will be refreshed when
the Refresh button is clicked.
Refresh
Click this button to show the current version information of the hardware. This can be used to check
whether the hardware program has been updated.
www.novastar.tech 25