Inverter Reset - Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual

2.6

Inverter Reset

After the parameters are changed, the inverters must be reset. Otherwise, the changed settings are not reflected. In this
manual, FR Configurator2 is used to reset the inverters. The following describes how to reset the inverters using FR
Configurator2.
1.
Select [Fault history] from the [Diagnose] menu bar on the toolbar.
2.
Click [Inverter reset], and click the [Yes] button on the window which asks whether to reset the inverter. When the inverter
(station number 1) is reset, the parameter setting is complete.
3.
Set the parameters for the inverter station number 2 using the same procedure as the inverter station number 1.
For the parameter setting of the inverter station number 2, start from the step 4 of in 2.4 Parameter Setting. (For the parameter
setting procedure, refer to  Page 12 Parameter Settings.)
An alarm history can be switched between the station number 1 and the station number 2 by selecting the
following station number list.
2 INVERTER SETTINGS
2.6 Inverter Reset
2
16