2.5
Writing Data to the Inverters
The parameter setting values entered in the parameter list are written to each inverter.
1.
Click the following icon on the toolbar to go online.
2.
Click [Batch write], and click the [Yes] button on the window which asks whether to write the parameters. After the
parameters are written to the inverter, reset the inverter.
A parameter list can be switched between the station number 1 and the station number 2 by selecting the
following the station number list.
2 INVERTER SETTINGS
15
2.5 Writing Data to the Inverters
Grayed out when
the
the inverter is offline.
Activated when
the inverter is online.