Ethernet Parameter Settings - Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual

2.3

Ethernet Parameter Settings

Parameters are set by connecting the inverters and the personal computer over Ethernet.
In this manual, FR Configurator2 is used to set the parameters. The following describes how to set the parameters using FR
Configurator2.
1.
Start FR Configurator2, and select [Ethernet parameter setting] from the [Tool] menu bar.
2.
When the inverters connected to the personal computer are detected automatically, their information, such as the model
and capacity, are displayed. Check that displayed information is correct, and click the [Batch assign] button.
When the personal computer has multiple Ethernet ports or uses a USB converter, the following window
appears. On this window, select a network adapter which is connected to the inverters.
FR-E800-E FR-E800-E
Hub
Ethernet
2 INVERTER SETTINGS
2.3 Ethernet Parameter Settings
2
10