Required Products - Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual

1.3

Required Products

In a system configuration example of this manual, two inverters (FR-E800-E) are connected to the FX5U CPU module.
FX5U CPU module
Use an FX5U CPU module that meets the following
conditions.
• Serial number: 17X**** or later
• Firmware version: 1.110 or later
Ethernet cable × 4
Use Ethernet cables compliant with the following standards.
• Category 5 or higher straight cable (double shielded / STP)
• IEEE 802.3 (100BASE-TX)
• ANSI/TIA/EIA-568-B (Category 5)
*1 A repeater hub cannot be used.
FR-E800-E × 2
First inverter Second inverter
(Station number 1) (Station number 2)
The PU port can be found when the front cover is
removed.
■FR-E800-E models
• FR-E820-EPA/EPB
• FR-E840-EPA/EPB
• FR-E860-EPA/EPB
Hub
Use a hub that meets the following conditions.
• Compliance with the IEEE 802.3 (100BASE-TX)
• Equipped with the auto MDI/MDI-X function
• Equipped with the auto-negotiation function
• Switching hub (layer 2 switch)
Personal computer and software
GX Works3
• Supported software version: 1.050C or later
FR Configurator2
• Supported software version: 1.19V or later
*1
1 PREPARATION
1.3 Required Products
1
6