Wavetronix Click 100 Series User Manual page 242

Setting
CTS Asserted
CTS Deasserted
Sync to channel
Sync Channel
DES Encryption
DES Key
Table 27.8 – Expert Driver Config 2 Tab
The 900 MHz > Config 3 tab contains timeout settings (see Figure 27.12 and Table 27.9).
Figure 27.11 – Expert Driver Config 2 Tab
Description
Reserved for hardware handshaking. This field is not editable.
Reserved for hardware handshaking. This field is not editable.
Allows you to synchronize channels with other servers.
Allows you to choose the channel number to synch to. This number
must be lower than the RF channel.
Allows you to encrypt data going across radios.
Must be the same on all radios you are using.
Figure 27.12 – Expert Driver Config 3 Tab
CHAPTER 28 • CLICK 400
241