Chapter 1 Introduction; Required Components - Raven AccuBoom Installation Manual

Case ih spx 3150, (’03 & older) 3185 & 3200, 3200b, & (’00 & older) 4260 patriot cabs with can product control, with or without aim command

Hide thumbs Also See for AccuBoom:

Table of Contents

CHAPTER

Congratulations on your purchase of the Raven AccuBoom™ system! This system is designed to

provide worry free turn on and turn off of your booms with respect to the as-applied coverage map. The

following instructions are designed to assist you in the proper installation of the AccuBoom™ system.

See your Console Operation Manual for instructions on setting up the software and using the

AccuBoom™ system.

Note:

All boom switches must remain in the ON position while AccuBoom™ control is in

operation.

The following components are required for complete installation of the Raven AccuBoom™ system.

Component

CAN, Node, AccuBoom™ Control

Cable, AccuBoom™ Control, Case IH SPX 3150, ('03 &

Older) 3185 & 3200, 3200B, & ('00 & Older) 4260 Patriot

Cabs and CAN Product Control, w/wo AIM Command

Cable, CAN, Adapter Tee, 24'

Manual, AccuBoom™ Installation, Case IH SPX 3150, ('03 &

Older) 3185 & 3200, 3200B, & ('00 & Older) 4260 Patriot

Cabs and CAN Product Control, w/wo AIM Command

Note:

If a CANbus system is not already installed on your machine, the CANbus Power Adapter

Tee and Terminator Kit (P/N 117-0159-923) will be required to complete the AccuBoom™

installation.

Manual No. 016-1001-020

I ntroduction

C H A P T E R 1

Part Number

063-0172-316

115-1001-036

115-0171-363

016-1001-020

Table of Contents