Safety Requirements - Raven AccuBoom Installation Manual

Chapter 1

Safety Requirements

Read this manual carefully before installing the AccuBoom™ system.
•
Follow all safety information presented within this manual.
•
If you require assistance with any portion of the installation or service of your Raven equipment,
contact your local Raven dealer for support.
•
Follow all safety labels affixed to the machine or implement. Be sure to keep safety labels in good
condition and replace any missing or damaged labels.
When operating the machine after installing AccuBoom™, observe the following safety measures:
•
Do not operate AccuBoom™ or any agricultural equipment while under the influence of alcohol or
an illegal substance.
•
Remain in the operator's position in the machine at all times when AccuBoom™ is enabled.
•
Disable AccuBoom™ when exiting from the operator's seat and machine.
•
Do not drive the machine with AccuBoom™ enabled on any public thorough-fare or main road.
•
Determine and remain a safe working distance from other individuals. The operator is responsible
for disabling AccuBoom™ boom section control when the safe working distance has diminished.
•
Ensure AccuBoom™ is disabled prior to starting any maintenance work on the machine.
Please review the operation and safety instructions included with your implement and/or controller.
Do not reverse the battery leads. Doing so will cause severe damage to the electrical equipment. Read
and follow installation instructions carefully when connecting lead wires to the battery.
2 Case IH SPX 3150, ('03 & Older) 3185 & 3200, 3200B, & ('00 & Older) 4260
NOTICE
CAUTION
Patriot Cabs with CAN Product Control, w/wo AIM Command