Important Safety Information - Raven TC1 Installation Manual

CHAPTER
1
Read this manual and the operation and safety instructions included with your implement and/or controller
carefully before installing the TC1™ system.
• Follow all safety information presented within this manual.
• If you require assistance with any portion of the installation or service of your Raven equipment, contact your
local Raven dealer for support.
• Follow all safety labels affixed to the TC1 system components. Be sure to keep safety labels in good condition
and replace any missing or damaged labels. To obtain replacements for missing or damaged safety labels,
contact your local Raven dealer.
When operating the machine after installing TC1, observe the following safety measures:
• Be alert and aware of surroundings.
• Do not operate TC1 or any agricultural equipment while under the influence of alcohol or an illegal substance.
• Remain in the operator position in the machine at all times when TC1 is engaged.
• Disable TC1 when exiting the operator seat and machine.
• Do not drive the machine with TC1 enabled on any public road.
• Determine and remain a safe working distance from other individuals. The operator is responsible for disabling
TC1 when the safe working distance has diminished.
• Ensure TC1 is disabled prior to starting any maintenance work on TC1 or the machine.
• Do not use hands to check for leaks. Hydraulic fluid under pressure can penetrate the skin and cause serious
injury or death.
• When starting the machine for the first time after installing TC1, be sure that all persons stand clear in case a
hose has not been properly tightened.
• The machine must remain stationary and switched off during TC1 installation or maintenance.

Important Safety Information:

I MPORTANT SAFETY
C H A P T E R 1
INFORMATION
NOTICE
WARNING
1