Preparing For Document Flow - Digital Check SmartSource Expert Micro Elite Installation And Operation Manual

Installation & Operations Guide - SmartSource Expert Micro Elite
Below is a chart for LED power button indication/function for Expert Micro Elite models starting with serial #
9203XXXX:
LED COLOR
RED
RED
RED
RED
BLUE
BLUE
BLUE
BLUE
PURPLE
RED/PURPLE
PURPLE
PURPLE
PURPLE

Preparing for Document Flow

1. Adjust the Floor Extender to the fully extended position.
2. For proper feeding, the Floor Extender should be extended to support the documents in the feed hopper and prevent
them from tipping or skewing.
June 2019
LED
STATE
SOLID
USB or Ethernet cable not connected
BLINKING Scanner error
SLOWLY
BLINKING Application generated error
RAPID
BLINKING Serious Scanner error (Cycle Power On Scanner)
SLOWLY
BLINKING Cable is connected
BLINKING Application is connected; Scanner is Idle
SOLID Scanner is ready to scan or is Actively Scanning
RAPID 1. Press power button down 6 sec. = Scanner OFF
BLINKING 2. Press power button down 1 sec. & Release = Motors ON (Clear Track)
RAPID In Cleaning Mode (Press/Release Power Button 3 times to enter this
BLINKING mode)
SLOWLY
BLINKING USB or Ethernet cable not connected; Cleaning Required
SLOWLY
BLINKING Cable is connected; Cleaning Required
BLINKING Application is connected; Cleaning Required
SOLID Actively Scanning; Cleaning Required
8227 6059-001
SCANNER STATE
Page 16 of 30