Preparing For Document Flow - Digital Check SmartSource SSM1-ELITE55-IJ Installation And Operation Manual

SmartSource Elite Series - Installation & Operations Guide
Below is a chart for LED power button indication/function for Front
Feed ID Card Elite models starting with serial # 9197XXXX:
LED COLOR
RED
RED/PURPLE
BLUE
PURPLE
BLUE
PURPLE
BLUE/PURPLE
BLUE/PURPLE
BLUE
PURPLE
RED
RED
BLUE
PURPLE
BLUE
RED/BLUE

Preparing for Document Flow

1. Adjust the floor extender and document limit to match the length of the documents to be fed by sliding
them out, as shown below.
2. For proper feeding, the floor extender should be extended to support the documents in the feed
hopper and prevent them from tipping or skewing.
3. The document limit should be set so that the document can fit easily in the pocket. If feeding
documents of different lengths, set the document limit to match the longest document.
May 2019
LED
STATE
SOLID
USB or Ethernet cable not connected
SLOWLY
BLINKING USB or Ethernet cable not connected
SLOWLY
BLINKING Cable is connected
SLOWLY
BLINKING Cable is connected
BLINKING Application has connected
BLINKING Application has connected
SLOWLY
BLINKING Application has connected
BLINKING Application has connected
SOLID Actively Scanning
SOLID Actively Scanning
BLINKING Scanner error
SLOWLY
BLINKING Application generated error
SOLID Actively Scanning
RAPID
BLINKING In Cleaning Mode
RAPID
BLINKING Clearing a jam
RAPID
BLINKING Serious Scanner error (requires reboot)
8227 4907-005
SCANNER STATE OTHER STATUS
Cleaning Required
Cleaning Required
Cleaning Required
Low Ink
Out of Ink
Cleaning Required
Page 15 of 37