Section 2; Operating The Unit; Powering On The Unit; Using The Power/Start-Stop Button, And The Meaning Of The Status Light - Digital Check SmartSource Expert Micro Elite Installation And Operation Manual

Installation & Operations Guide - SmartSource Expert Micro Elite

Section 2

Operating the Unit

Powering on the Unit

Press the power button. The blue status light within the button will light. When the unit is ready for use, the light will
stay on.

Using the power/start-stop button, and the meaning of the status light

The power/start-stop button has various functions when the machine is working. The blue status light within the button
tells you the condition of the machine.
Function
Power on
Power off
Clear document
from track –
'SmartClear'
function
See Page Below for Expert Micro Elite Models starting with serial # 9203XXXXX
June 2019
Operation of button & Blue Status LED
Press and hold the button for more than 2 seconds-
power button light will be on for a couple seconds and
the will be blinking
Press and hold the button until the power button light
turns off
Press the button for more than 1 second and less
than 5 seconds, then release the button. After 1
second, light will blink more quickly to show that
'SmartClear' function has been selected.
The track will start and eject the stopped document,
then stop.
.
Status Light Indication/Function Chart
8227 6059-001 Page 15 of 30