Table of Contents
Advertisement
Car-O-Liner Group AB
1 General
1.1
About this manual
1.2
Previous knowledge and experience
WARNING
41643, ENG - rev. 2, 2016-10
This manual provides information on operating the following appliance:
CTR12000 with connection for water cooled C welding gun and optionally
available multifunction gun.
For further information on special features of our equipment you may
perhaps need and that are fully or partly missing in this manual, please
contact your local Car-O-Liner distributor.
This manual has been drawn up for shop managers and for any other person
that is involved in machine installation, operation and maintenance. Make
sure that these persons have fully read and understood this manual and the
information contained therein.
Keep it at a well-known, easily accessible place and look it up for advice, if
need be.
Please read the manual carefully before putting the welding machine into
operation for the first time. It contains important information on installation,
startup, operation, cleaning, maintenance and troubleshooting. Therefore
keep it carefully in an easily accessible place.
Users should have basic knowledge of resistance spot welding; otherwise
they will not be able to understand the manual.
The general rule is
The welding machines being subject of this operating manual have
been developed and designed for industrial use only and for
operation by specialist staff.
This equipment does not comply with IEC 61000-3-12. If it is connected to a
public low-voltage system, it is the responsibility of the installer or user of
the equipment to ensure, by consulting with the distribution network opera-
tor if necessary, that the equipment may be connected"
CTR12000
6
Hide quick links:
Advertisement
Table of Contents
