Appliance Multifunction Gun (Option) - Car-O-Liner CTR12000 Instruction Manual

CTR12000
4.3

Appliance Multifunction gun (Option)

Holder for Multifunction gun
41643, ENG - rev. 2, 2016-10
D
C
Hang the current cable adapter A acc. to photo polarity direction in the gun
and insert & lock control plug B in the appropriate socket at the rear side of
the gun transformer. Fit the multifunction gun with the desired electrode,
switch on the current source, turn on switch SINGLE on the front side of the
current source and press once the Start button on the transformer gun. The
gun closes, contacts the adapter and stays closed. After attaching the earth-
ling lead clamp C to the car body, work can now start with the multifunction
gun. Now set the desired welding current and time, bring the multifunction
gun into position, press together, press the Start button D and hold steady in
position until the welding process has been completed.
The earth lead clamp must be attached to the metal on the bodywork as close
to the welding point as possible. Important is a good electrical transfer,
sometimes it is better to work with 2 earth leads.
When working with the multifunction gun has been completed, press the
Start button again on the transformer gun - this opens and the adapter can be
taken out.
Car-O-Liner Group AB
J
A
B
1. Pulling hammer for attachments
2. Special chuck for puller ring
3. Carbon electrode
4. Disk electrode
5. Electrode for threaded pin
6. Electrode for finely threaded pin M4 / nail
7. Electrode for trim nipple
8. Upsetting electrode
9. Push spot electrode 16 mm Ø
10. Puller hook for slide hammer
11. Washer 8 x16 x1,5 mm, Cu-plated, VE 50 pcs.
12. Special – puller ring, triangular, VE 20 pcs.
13. Coarse threaded pin 5 x 25 mm, VE 100 pcs.
14. Coarse threaded pin 5 x 18 mm, VE 100 pcs.
15. Coarse threaded pin 5 x 12 mm, VE 100 pcs.
16. Threaded pin M5 x 18 mm, VE 100 pcs.
17. Threaded pin M4 x 12 mm, VE 100 pcs.
18. Fixer nipple 5 x 8,2 mm, VE 100 pcs.
19. Trim nipple 3 x 4,5 mm, VE 100 pcs.
20. Trim nipple 3 x 3,2 mm, VE 100 pcs.
27