Storage; Using Of The Optional Support Arm And Balancer (Included In The Vas 6755 And Bmw Version) - Car-O-Liner CTR12000 Instruction Manual

CTR12000
3.8

Storage

CAUTION
3.9 Using of the optional Support arm and Balancer
(included in the VAS 6755 and BMW version)
Workmode
Topview
Maximum radius
of movement
41643, ENG - rev. 2, 2016-10
Storing conditions to be fulfilled when storing the packed or unpacked weld-
ing machine and its accessories are:

Storage must be in enclosed rooms

Maximum atmospheric humidity of 80%

Temperature range of ambient air: –15°C* to +45°C (corresponds to
a range from +5°F to +113°F)
* The minimum temperature of –15°C (+5°F) only applies to machines with
empty tank. Before storing machines that are filled with tap water and KF
330 coolant at temperatures below -2°C, completely drain the cooling liquid.
Make sure that the cooling circuit is fully emptied. Owner/operators MUST
read the chapter Coolant!
Anyway, suitable precautions are necessary to protect the machine against
humidity, dirt and corrosion. The manufacturer shall not be liable for any
damage resulting from improper storage!
Please note, that the support arm is designed only for limited radius of
movement. Do not overstep this radius, as there is an acute tilting danger by
the hanging welding gun.
Wheel extension is included in the CTR12000 standard delivery,
see supplementary mounting instruction 44131.
Car-O-Liner Group AB
23