Car-O-Liner CTR12000 Instruction Manual page 39

CTR12000
CURRENT-CONDUCTING COMPONENTS
WHAT TO DO IN CASE OF EMERGENCY
BATTERY MAINTENANCE
41643, ENG - rev. 2, 2016-10

In case of leakage, immediately stop maintenance and eliminate the
causes for the leakage.

Check the automatic drain system of the water separator.

Check manometer gauge for precision.
Maintenance work on the electric equipment of the machine may be exclu-
sively carried out by qualified and trained persons being instructed to do
their job in a safe environment. Unplug the mains plug to avoid fatal electric
shocks before performing the following checks.
Check the grounding at regular intervals.
Check the function of the control elements at regular intervals: micro switch,
sockets, plugs, control cable.
Check control elements, associated cables of inner and outer connectors
more often for their condition and perfect function.
In emergency; switch off the spot welder with the mains switch.
If inrushing water might penetrate the machine, immediately unplug the
mains plug.
In case of fire hazard, do not use water but suitable fire extinguishers.
After a case of emergency, trained and qualified staff being instructed on the
required test procedures must start up the power source again.
Expected lifetime for the battery in the control unit is 5 years. The battery
shall be changed by authorised service personnel.
Car-O-Liner Group AB
39