How Can I Set And Add A Transformer (Modbus-Rtu) - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Context
The method of connecting the PDU8000 to the ECC800-Pro is the same as that for
the integrated PDU. Connecting the integrated PDU to the ECC800-Pro by
following the instructions in this section.
Procedure
Step 1 Set the PDU8000 monitoring parameters.
1.
2.
3.
----End

8.1.7.7 How Can I Set and Add a Transformer (Modbus-RTU)?

Prerequisites
One end of the RS485 cable has been connected to ports 19 and 20 on the
transformer temperature controller, and the other end has been connected to the
COM port on the ECC800-Pro.
Procedure
Step 1 Set the communications address for the transformer LCD.
Procedure
1
2
3
4
Issue 02 (2020-09-07)
Enter the PDU8000 home screen, tap System Info.
Choose System Info > Settings, enter the user name admin and password
000001, and tap
Tap Communication to set IP address assign to Automatic(DHCP) on the
displayed communication settings screen and the PDU8000 is discovered by
ECC800-Pro automatically and is connected to the ECC800-Pro.
NO TE
– On the Communication screen, set SSL to Enable.
– If the PDU is a modular precision PDU, set modbusTCPcertification to Disable on
the Communication screen.
Button
SET
SET
SET
Copyright © Huawei Technologies Co., Ltd.
.
Display Description Range
Enter the /
function
operation
state.
/ /
Communicati /
ons address
setting
password
Communicati /
ons address
8 FAQ
268