Polycom HDX Series Administrator's Manual page 13

To power off the Polycom HDX system:
Press and hold the
Press and hold the power switch on the front of the system for 2 seconds.
The following figure shows the location of the power switch and indicator
light.
The indicator light on the front of the system provides this information:
Indicator Light
Off
Steady green light
Blinking green light (once)
Blinking green light (on 1 sec, off 2 sec)
Steady amber light
Blinking amber light (once)
Blinking amber light
Rapidly blinking amber light
Introducing the Polycom HDX Systems
power button on the remote control for 2 seconds.
System Status
System is powered off
System is initializing
System is awake and not in a call
System received an IR signal while
awake and not in a call
System is asleep, not in a call
System is in a call
System received an IR signal while in
a call
System is in software update mode
System is in factory restore mode
System is preparing to reset its
configuration
1 - 3