Polycom HDX Series Administrator's Manual page 27

Hide thumbs Also See for HDX Series:
Table of Contents

Advertisement

To set up the system to work with a firewall or NAT:
1. Go to System > Admin Settings > Network > IP > Firewall.
2. Configure these settings on the Firewall screen:
Setting
Fixed Ports
TCP Ports
UDP Ports
Enable
NAT/Firewall
Traversal
NAT Configuration
NAT Public (WAN)
Address
NAT is H.323
Compatible
Address Displayed
in Global Directory
Description
Lets you specify whether to define the TCP and UDP ports.
If the firewall is not H.323 compatible, enable this
setting. The Polycom HDX system assigns a range of
ports starting with the TCP and UDP ports you specify.
The system defaults to a range beginning with port 3230
for both TCP and UDP.
Note: You must open the corresponding ports in the
firewall. You must also open the firewall's TCP port
1720 to allow H.323 traffic.
If the firewall is H.323 compatible or the system is not
behind a firewall, disable this setting.
Lets you specify the beginning value for the range of TCP
and UDP ports used by the system. The system
automatically sets the range of ports based on the
beginning value you set.
Note: You must also open the firewall's TCP port 1720 to
allow H.323 traffic.
Allows the system to use H.460-based firewall traversal. For
more information, refer to
page 2-14.
Lets you specify whether the system should determine the
NAT Public WAN Address automatically.
If the system is behind a NAT that allows HTTP traffic,
select Auto.
If the system is behind a NAT that does not allow HTTP
traffic, select Manual.
If the system is not behind a NAT or is connected to the
IP network through a Virtual Private Network (VPN),
select Off.
Displays the address that callers from outside the LAN use
to call your system. If you chose to configure the NAT
manually, enter the NAT Public Address here.
Specifies that the system is behind a NAT that is capable of
translating H.323 traffic.
Lets you choose whether to display this system's public or
private address in the global directory.
H.460 NAT Firewall Traversal
Networks
on
2 - 13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdx 9004

Table of Contents