Connecting To An Analog Phone Line - Polycom HDX Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Connecting to an Analog Phone Line

2 - 22
Setting
Pulse Width
(millisec)
6. Select and configure these settings:
Setting
Enable Broadcast
Mode
Enable People+Content
Video Format
Video Protocol
Audio Protocol
Frame Rate
You can connect an analog phone line to the Polycom HDX system to make
regular telephone calls with the system or to add audio-only participants to
video calls.
The country setting must be configured correctly on the Polycom HDX system to
ensure proper operation of the phone line and to comply with local telephony
regulations.
Description
Specifies whether the system should set the pulse
duration automatically or use the number of milliseconds
you enter.
Description
Enables support for H.331 broadcast transmissions
from the Polycom HDX system.
Broadcast mode enables the system to send video
and audio to many other systems, such as large
satellite networks.
Enables People+Content for broadcast mode.
Specifies the resolution at which video is transmitted.
Specifies the protocol used to transmit video. Choose
the lowest protocol supported by all systems in the
conference.
Specifies the protocol used to transmit audio.
Specifies the frame rate to use.