Persistent Clipping Notifications And Peak Hold - RME Audio AVB Tool User Manual

Half-rack madi-avb converter with outstanding analog connectivity

Hide thumbs Also See for AVB Tool:

Table of Contents

To change the metering mode on the device:

1. Open the visual feedback tab in the STATE section.

2. Open "Global Meters" using the corresponding button.

3. Press the first button to toggle between Peak and RMS metering.

This is a global setting which affects both the front panel level meters and the remote



control interface.

8.3.3. Persistent Clipping Notifications and Peak Hold

The maximum level of signals can be saved and shown on the front panel and web remote. Clipping is

detected when three consecutive samples reach digital full scale (0 dBFS). The duration of how long the

maximum level or clipping is shown can be manually changed to either five seconds or until they are

manually reset.



This is a global setting which affects both the remote control and the device.

33 | 8.3. Front Panel Illumination

RME AVB Tool User's Guide

On the device, an over notification is signaled as a fast flashing (red) of the

channel LED.

Table of Contents