Table of Contents
Advertisement
10.2.4. Using Phones Out as a Balanced Line Output
The headphone output can operate as a mono balanced line level output. This may for example be useful
when an active talkback speaker with symmetrical input is connected to the 12Mic.
To toggle balanced output mode on the device:
1. On the main screen, press the Phones button to access phones output settings.
2. Press the encoder to open additional settings .
3. Press the btn::[BAL] button to switch the channel to balanced out. The channel that was routed to the
left phones output will now be applied to both tip and ring of a TRS connector, the phase being
inverted on the ring.
10.2.5. Line Level Outputs
The rear analog TRS connectors can be configured as individual channels or a
stereo pair and their level adjusted to +4 dBu or +19 dBu. Any incoming signal can
be routed to the analog outputs. To access these channels from the standby
screen, open the phones settings first and then use the '3|4' button to open the line
outputs.
10.2.6. Changing Analog Output Volume
The level of the balanced line level outputs can be adjusted separately or as a stereo group.
RME AVB Tool User's Guide
10.2. Analog Outputs | 58
Advertisement
Table of Contents
