Table of Contents
Advertisement
3.10. Control Section
Analog Input LEDs with Integrated Metering
Analog Input User Interfaces
Display buttons
Toggle P48/Hi-Z/TRS
Display
Phones output with routing
Input tab with warning
Standby Switch, Encoder
The AVB Tool can be configured completely at the device. To do so, the a TFT display shows a menu.
The adjacent encoder knob and buttons are used to navigate and change settings. In addition, each input
channel has a dedicated button to access its controls.
The encoder can be pushed in order to activate an item,
and rotated left and right in order to select an item.
If the device is powered on but the display shows no content, dark mode is active. Rotate
the encoder to temporarily bypass this mode and show the display.
RME AVB Tool User's Guide
3.10. Control Section | 14
Advertisement
Table of Contents
