Table of Contents
Advertisement
The input is terminated with 75 Ω internally. To pass on the word clock to other devices,
use the word clock output. Do not connect a T-adapter to the word clock input.
The state of an incoming word clock signal can be accessed in the CLOCK section.
Possible States:
• A green indicator shows that the signal is currently in sync with the chosen clock master.
• An orange indicator means that a word clock is received but is not in sync.
• A red indicator means that word clock is chosen as master, but a signal is not present or has a
different sample rate than the chosen one.
3.16. USB 2.0 Type B Jack
The USB jack at the rear of the AVB Tool provides an alternative connection method for web remote
control when a network connection is not available.
When connecting the AVB Tool with a standard ("printer") USB 2.0 cable to a current
Microsoft Windows™ or Apple macOS™ operating system, a network adapter will be automatically
installed. This does not require additional drivers. The device can then be remotely controlled by opening
RME AVB Tool User's Guide
3.16. USB 2.0 Type B Jack | 18
Advertisement
Table of Contents
