Saving Presets; Loading Presets - RME Audio AVB Tool User Manual

Half-rack madi-avb converter with outstanding analog connectivity

Hide thumbs Also See for AVB Tool:

Table of Contents

• MADI SFP/Optical Ch. 1 - 4

• AVB Stream 1 Ch. 1 - 4

• ADAT 1 Ch. 1 - 4

8.1.1. Saving Presets

Up to 15 presets can be saved in the internal storage of the AVB Tool.

To save a preset on the device:

1. Open the preset tab in the STATE section. The currently loaded preset is shown.

2. (optional) Rotate the encoder to choose a preset that should be overwritten.

3. Push Save to save the preset.

Up to 15 custom presets can be loaded from the internal storage of the AVB Tool.

Loading a preset cannot be undone. Ensure that any important configuration has been



saved to another preset before proceeding.

The device name is part of the preset. When a preset is loaded, the device name is changed



to the value stored in the preset.

To load a preset on the device:

1. Open the preset tab in the STATE section (see: Use of the Display and Encoder).

2. Rotate the encoder to choose a preset.

3. Select Load to load the preset.

29 | 8.1. Presets

RME AVB Tool User's Guide

Table of Contents